Re: Remote Desktop Console: Unable to Find Software License
Have you talked to Teklynx about this issue? I ask because I doubt this is something the community here can help with, unless its a program that is installed by Dell and Dell supports. if you log into...
View ArticleRe: Blue Screen On Windows Install Dell C6100
I also would like to add that the server came preconfigured to use 6x1tb drives in a raid 5 array. I am assuming that this current configuration is a working one. Therefore it was in a production...
View ArticleRe: Remote Desktop Console: Unable to Find Software License
My warranty is out w/ them so I decided to give it a shot here. I was trying to figure out if there was some kind of system configuration difference when using remote desktop session.
View ArticleRe: Blue Screen On Windows Install Dell C6100
Since I did not get an answer about updating the bios, I will not be doing that at this time. I finally got the HD on the raid controller to be visible as a boot option in the bios. Completing the...
View ArticleRe: Install RedHat v 5.5 on PE R720, disk drives not found during install
Cosky,Just wanted to let you know, that if you are also looking for unattended installation of RHEL, you can choose to deploy the server using Deployment Tool Kit (DTK),...
View ArticleRe: Blue Screen On Windows Install Dell C6100
I can now install windows to a drive on a separate controller, but it will not work to install the OS to the drives attached directly to the system board. I did not plan for this in my build budget and...
View ArticleRe: RAID 1 problem
hi hamodee,Couple of questions:1. Could you confirm if the server is in ATA mode (F2 -> BIOS -> SATA Settings)2. Are you able to create RAID 0 or 1 using 2 HDDs from CTRL BIOS (CTRL + R) Please...
View ArticleAll network connections dropped mysteriously
My apologies if this is the wrong forum...I have a DELL R300 server with the on board dual port NIC (Broadcom) and an additional Intel dual port NIC.The Broadcom NIC is used to communicate with our SAN...
View ArticleRe: All network connections dropped mysteriously
Correction... the servers are not 6 years old, they are 3 years and 4 months... my math is terrible apparently.
View ArticleRe: RAID 1 problem
You have to tell us what RAID controller you have ... you need the driver for the RAID controller in order for the disks to be seen. You must also FIRST create a RAID array before disks can be seen,...
View ArticleRe: Driver for "DP BACKPLANE SCSI Enclosure Device" ?
I know this topic is about five years old but I was searching for the same driver today and took a while. For reference the Dell Backplane, A05 driver for the Storage Backplane for the PE195X models...
View ArticleRe: PE2950 Intermittent network problems
Please share the below information for our understanding.1)Share the network card Family type like Broadcom,intel,QLogic etc2)Provide the Firmware and driver version of the NIC.3)Is the NIC supporting...
View ArticleRe: PE2950 Intermittent network problems
Thanks for posting this because it reminded me that I had not posted the solution. After I updated the firmware, I checked IPconfig again and it said my IP address was 192.168.2.11 (Duplicate). I...
View ArticleRe: Driver for "DP BACKPLANE SCSI Enclosure Device" ?
To keep you from having to "search" more for it, here is the download page intended for that link:http://www.dell.com/support/drivers/au/en/19/DriverDetails?driverId=KTK5FNote, that this is the exact...
View ArticlePE M600 w/ Broadcom - Error code 10
Forgive me if that has already been presented. I have searched the Forum for this issue with no luck finding anything. Here is my issue:I recently purchased a Dell m1000e chassis, but I have an issue...
View ArticleClik here to view.
Re: PE M600 w/ Broadcom - Error code 10
Koobenhoff,If you look under the network connections, do EITHER of them have MAC addresses assigned. I have seen this happen before and normally clearing the NVRam resolves the issue. To clear the...
View ArticleRe: PE M600 w/ Broadcom - Error code 10
Koobenhoff,I would suggest you also to take a look into this troubleshooting link from microsoft for the same error code:support.microsoft.com/.../943104ThanksVivek
View ArticleRe: Windows Server 2008 R2 & Broadcom Issues
All,Iwas having the exact same issue. I disabled the TCP Chimney offload, andthought it didn't make any difference.I held off rebooting and then five minutes later, the server started actingnormally....
View ArticleRe: Windows 2012 on PowerEdge T710
What is the difference between OpenManage Server Administrator and Systems Management Tools and Documentation?
View ArticleRe: Windows 2012 on PowerEdge T710
the SMTD contains the OpenManage Server Administrator application (omsa) and can help you perform an OS installation and fw updates all in one process.
View Article