Re: Upgrading PERC 6/i firmware
Its a dell poweredge r410. It uses SATA drives only at the moment
View ArticlePoweredge R420 Drivers for Windows2003
Hi,Can anyone help me to get Win2k3 64bit drivers for R420 server?Thanks
View ArticleRe: Upgrading PERC 6/i firmware
http://ftp.dell.com/FOLDER00416687M/1/SAS-RAID_Firmware_392W6_WN32_6.3.1-0003_A14.EXE
View ArticleRe: Poweredge R420 Drivers for Windows2003
You know that Server 2003 is not supported on the R420, right? That does not mean it won't work, but it is possible it will not. It just means that Dell will not help you install it, and they will...
View ArticlePowerEdge Cloudserver CS23-SH ... will it support ESXi 5.1?
Looking to buy a used CS23-SH server for a personal VMware lab. Certified VCP4 and need to stay up with the tech. Rather not Whitebox it as most enterprise customer's don't but don't want to purchase...
View ArticleT110 ii with PERC H200 and SBS 2011 or Server 2008 R2 - BSOD when adding drives
Purchased the following server in November 2011Poweredge T110 IIManufDate: 10/24/2011 First Turned on: 11/6/2011RAM: 16GB (4x4) 1333mhz DualRanked UDIMMCPU: Xeon E3-1270 3.4Ghz, 8M cache, Turbo,...
View ArticleRe: Installation Windows server2003 with errors
Can't install win2003 server on a Dell Power Edge R210 II
View ArticleRe: Installation Windows server2003 with errors
Not surprising. Where are you stuck? What is your RAID controller? What is your drive config?
View ArticleRe: T110 ii with PERC H200 and SBS 2011 or Server 2008 R2 - BSOD when adding...
There is NO migration path TO or FROM a nested RAID level (10, 50, 60) on any of the H-series PERC's, so going from RAID 1 to 10 isn't an option (without backup/replace/create/restore).The firmware...
View Articlehow can install win server 2003 dell poweredge r210 ii
hi plesea how can install win server 2003 dell poweredge r210 ii
View ArticleRe: T110 ii with PERC H200 and SBS 2011 or Server 2008 R2 - BSOD when adding...
Thanks for the migration info. Yes, the original VD did stay marked as the boot volume even though it changed its enumeration in the config utility from 1 to 2 after adding the new raid 1 pair.
View ArticleRe: how can install win server 2003 dell poweredge r210 ii
First, realize that Dell does not support 2003 on the R210 II, meaning they offer no assistance to do so, and they offer no 2003 drivers for that system. That doesn't mean it won't work, but it may...
View ArticleRe: Want to install Server 2012 on PowerEdge 1800
I am using an IDE DVD drive with my Poweredge 1800. I would make sure it is enabled in the BIOS. I have also tried to install Server 2012 and haven't had any luck... I get stuck on Windows is loading...
View ArticleRe: Want to install Server 2012 on PowerEdge 1800
Have you tried installing via USB? Have you tried the DVD on another system to make sure the image/disc is good?
View ArticleRe: SLES 11 SP2 on PE R420
I downloade the iso and burned them and i did an install today, everything went well. My main goal was to ensure that the install would work at all. My system was an R520 with an H710 mini. Can you...
View ArticleRe: Want to install Server 2012 on PowerEdge 1800
So I found the answer to my issue. I tried server 2012, 2008R2, 2008, and all had the same issue with locking up after the files loaded.I removed the Perc 6/i RAID card and attempted again... Success....
View ArticleRe: T110 ii with PERC H200 and SBS 2011 or Server 2008 R2 - BSOD when adding...
Am proposing to do the following. Do these steps look right? Would this be how you would do it?Was wondering if there was any advice/gotcha's in regards to the following steps and how long do you think...
View ArticleRe: Want to install Server 2012 on PowerEdge 1800
No ... I have installed DOZENS and DOZENS of systems with 2008R2 with "add-on" cards (most with a PERC 6/i), and one with a PERC 6/i and 2012 ... had to have been a driver issue or an issue with the...
View Article