Re: Installing Server 2012 on PowerEdge T110 II in Raid Mode
Awesome. That's good to know. I will give it a try until my RAID controller arrives early next week. Thanks.
View ArticleRe: R410 - BROADCOM NIC can run VLAN tagged under Linux?
Hi,Seems it did not sending the tagged frames. Even I set to native or trunk mode. The packet also like this16:28:21.816270 d4:ae:52:8d:33:40 > 00:24:dc:0b:a1:07, ethertype IPv4 (0x0800), length...
View ArticleRAID 5, windows/ubuntu server
Poweredge t110 ii server , with 4 hard disks controlled using RAID 5 ,OS was windows server 2008 first i used the dell CD and change the OS configuration to windows essential business then CD install...
View ArticleRe: RAID 5, windows/ubuntu server
What controller do you have installed in your T110 II? If its a S100 or S300, it will run Windows only. You may have corrupted your Windows installation and will need to start over. . If you...
View ArticleRe: SLES 11 SP2 on PE R420
well, lets start with which openmanage cd from dell you are using, for the R420 you should be using this discwww.dell.com/.../poweredge-r720you could also try using the lifecycle controller (F10 at...
View ArticleRe: SLES 11 SP2 on PE R420
Thanks indeed! Using the Lifecycle Controller "OS Deployment" function resulted in the needed drivers being written somewhere. I got a notice that the inserted media could not be verified, but I was...
View ArticleRe: SLES 11 SP2 on PE R420
Well, almost... In the OS Deployment function I configured the controller RAID5 with all 4 600GB PDs. The SLES 11 installer only sees 307MB of available disk space to partition. It was unable to...
View ArticleRe: SLES 11 SP2 on PE R420
I see. I should look again when the controller is done intializing the volume.
View ArticleRe: Booting ESXi 5.1 from Internal Dual SD Module fails
Support sent me a new Internal Dual SD card reader and it boots correctly now (under UEFI). I have rebooted a few times (I know I'm a bit paranoid) and comes up each time. Thank you for all your help...
View ArticleRe: SLES 11 SP2 on PE R420
This morning the RAID was done synching. Rebooting into the SuSE installer, I still only had access to a 308MB disk. I then tried booting to the R720 ISO you suggested and went through the initial...
View ArticlePowerEdge R210 II OS installation
I'm also facing same kind of issue. We want install Linux at ourDell Powe Edge R 210 II. Please suggest us any solution for it ASAP.
View ArticleRe: PowerEdge R210 II OS installation
What flavor of Linux are you trying to install?What RAID controller does your R210 II have?How many disks? What RAID configuration (if any)?
View ArticleRe: BSOD: DPC Watchdog Violation on R710
I'm seeing the same issue on DELL T3600 workstation running Windows 8. This happens when the computer wakes up from sleep mode. I see the DPC_WATCDOG_VIOLATION Error. I also see in the system log:The...
View ArticleHow to install W2012Std on PowerEdge R210 II?
'evenin.Because i found so many manuals stating the Windows Server 2012 is supported on this server i went in and bought the server. I used the DVD that came with the hardware to start the OS...
View ArticleRe: SLES 11 SP2 on PE R420
lets check this, go into the System BIOS at bootup, go to Boot Settings>BIOS Boot Settings>Hard-DIsk Drive Sequence, make sure that your RAID controller is listed first. If this is already...
View ArticleRe: How to install W2012Std on PowerEdge R210 II?
Hello wickedbuzzWe haven't released an OS driver pack that has the necessary files to install server 2012. In the meantime you can install directly from the 2012 DVD or boot to the System Build and...
View ArticleRe: How to install W2012Std on PowerEdge R210 II?
Wicked, see this thread, same issue en.community.dell.com/.../19489914.aspx
View ArticleClik here to view.
Re: How to install W2012Std on PowerEdge R210 II?
Ty for quick response Daniel.You mentioned the System Build and Update Utility..When using the System Build and Update Utility for OS deployment, i cannot choose Win2012Std as my choice, it is not...
View ArticleRe: How to install W2012Std on PowerEdge R210 II?
WickedBuZzWill it work if i download the 1693MB utility from the link you gave me?Yes, the SBUU I linked is newer than the OS driver pack installed on the lifecycle controller. It has server 2012 as an...
View ArticleRe: How to install W2012Std on PowerEdge R210 II?
Daniel, i think i have that S100 controller, yes. I will doublecheck it in the morning. I've checked out the link he posted, am i supposed to try the os deployment with S100 drivers for win2008?(Thanks...
View Article